The frame's up, the springs are on, and the kids are already circling the yard like it's launch day. There's one job left before anyone climbs aboard: the safety net. At SpaceJump™, we build every trampoline around its enclosure, so we know exactly how it should go together. Below, you'll find what you need, each installation step in order, the mistakes worth avoiding, and quick answers on fit, cost, and timing.
Quick Answer:
To install a trampoline safety net, lay the enclosure over the jump mat with the entrance between two leg poles, then hook its base to the mat's D-rings all the way around. Fit the spring pad, assemble the padded net poles, and click them into the leg poles. Attach the top to each pole, then check for gaps and even tension before anyone jumps.
Why a Trampoline Safety Net Matters
A well-fitted safety net keeps jumpers on the mat and away from the springs and steel frame, so kids can focus on bouncing instead of where the edge is. We design and test our trampolines to be used with the full enclosure installed, and using one without it may affect your warranty.
Think of the enclosure as one part of a bigger safety routine. Pair it with adult supervision and one jumper at a time, and your crew can bounce with confidence.
What You'll Need Before You Start
The safety net is one of the final stages when you assemble a trampoline, going on once the frame, springs, and jump mat are securely in place.
For the enclosure stage, you'll need:
- The 360° Infinity Net
- Net poles (upper and lower sections) with foam sleeves
- Screw caps for the net's top eyelets
- The spring pad
- The screwdriver included in your box
A second adult makes raising the poles much faster.
How to Install a Trampoline Safety Net Step by Step
The order below applies across our range, though part counts vary by size, so keep your manual open as you work.
Step 1: Lay Out and Check Every Part
Group the enclosure components on a clean patch of lawn and count them against your manual's parts list. Finding a missing screw cap now takes two minutes. Discovering it with the net half raised takes a lot longer.
Step 2: Position the Net Over the Mat
Spread the safety enclosure across the jump mat and rotate it until the entrance sits between two leg poles, giving kids a stable spot to climb in and out. Check it isn't twisted, since a twist here becomes a crooked enclosure later.
Step 3: Attach the Net's Base to the Mat
Starting at the entrance, thread the fabric hooks at the base of the enclosure through the mat's D-rings and over the spring hooks. Work around the full circle without skipping any. That connection closes the gap at the mat's edge, so little feet can't slip toward the springs.
Step 4: Fit the Spring Pad
Lay the spring pad over the springs and outer frame, lining it up so the poles can pass through at each leg. It should sit flush all the way around with no metal showing.
Step 5: Assemble the Net Poles
Connect the upper and lower section of each pole, then slide on its foam sleeve so it covers the full length. The sleeves cushion any bumps during play, and the poles' outward curve gives jumpers extra room.
Step 6: Raise the Poles into Place
Feed the base of each pole through the spring pad and into its leg pole until it clicks. If a pole won't slide in smoothly, check its orientation rather than pushing harder. A helper can steady each pole while you guide it home.
Step 7: Attach the Top of the Net
Fit the top eyelets onto the pole tips and secure each one with its screw cap. Work evenly around the circle so tension builds on all sides together. The finished enclosure should stand taut, without sagging between poles.
Step 8: Do a Final Safety Check
Before anyone climbs on, tug gently to confirm even tension, check every cap and base hook, and make sure the entrance flap closes neatly. A tall enclosure catches wind, so if your yard is exposed, now's the time to anchor your trampoline.
Common Mistakes to Avoid When Installing a Trampoline Net
Most enclosure problems trace back to a few small slip-ups:
- Skipping D-rings at the base: Every missed connection leaves a gap at the mat's edge.
- Forcing poles into place: A stuck pole is usually facing the wrong way, and pushing harder can bend it.
- Securing the top on one side first: Working unevenly pulls the enclosure off-center and creates slack elsewhere.
- Mixing parts from other brands: Enclosures are sized to specific frames, and ours are engineered for our models only.
- Ignoring the forecast: In gusty areas, a Gravity Anchor Kit helps keep the frame planted. Before a severe storm, lowering or removing the enclosure reduces how much wind it catches.
How SpaceJump™'s Trampoline Range Simplifies Net Installation
We treat the enclosure as part of the trampoline, not an add-on. Every model ships with its 360° Infinity Net, padded poles, spring pad, and the tools to fit them. A few design details make the net stage smoother:
- A self-closing, overlapping entrance flap, so there's no zipper to jam or forget to close
- Springs positioned outside the net, keeping them clear of the jumping area
- Curved, foam-sleeved poles that click into place, so you know each one is seated
- UV-resistant, tightly woven netting designed to handle every season
Whether you choose an Astro as the base for a growing backyard play system, or a Nova for every safety essential with no frills, the enclosure goes on the same way.
Frequently Asked Questions
Can You Put a Net on Any Trampoline?
Not always. A safety net has to match your trampoline's diameter, leg count, and pole attachment points, and parts are rarely interchangeable between brands. Our enclosures are engineered for SpaceJump models only, so if you need a replacement, send our support team your order number and we'll find the right fit.
Does a Trampoline Net Go on the Inside or Outside?
On our trampolines, the net attaches inside the springs, right at the edge of the jump mat. That placement keeps the springs and frame outside the jumping area, so kids can't land on them mid-bounce. Outside-mounted nets leave springs within reach, which is why we mount ours inside.
How Much Does a Trampoline Safety Net Cost?
On a SpaceJump trampoline, the safety net costs nothing extra, because every model includes its full enclosure, padded poles, and spring pad. That's worth factoring in when you compare prices, since a trampoline sold without an enclosure means buying one separately. If you ever need a replacement net, pricing depends on your trampoline's size.
How Long Does It Take to Set Up a Trampoline with a Safety Net?
Most families finish a full setup, safety net included, in about 1–2 hours with two people. Larger models with more springs and taller poles take a little longer, so we suggest setting aside a relaxed afternoon.
A Properly Installed Trampoline Net Gives Parents Complete Peace of Mind
A safety net does its best work when every base hook is connected, every pole clicks home, and the top sits taut all the way around. Take each step at your own pace, anchor your frame in windy spots, and pair the enclosure with supervision and one jumper at a time.
If you're still choosing your family's trampoline, explore our range of trampolines, each one ready for liftoff with its safety enclosure included.